Search
Close this search box.

MX1 PRO wireless dual lens set, easy DIY installation

The traditional double-mirror motorcycle recorder needs to break and connect power and wiring, which often takes 2-3 hours and costs 1500-2500. However, the special integrated design of the lens and host of the MX1 PRO allows for a streamlined installation with less dismantling of the vehicle and less wiring. With dedicated wires, it is not only suitable for installation in gear trucks and heavy machinery without carriages, but also can be used in general high-speed or high-speed vehicles. There is no problem in reinstalling the car shell. Usually, you only need to remove the front car shell and glove box, and the installation can be easily completed.

For the best-selling motorcycles of Sanyang, Sanye and other brands, Datong has also designed a variety of special wires to allow the motorcycle recorder power supply to be quickly connected to the motorcycle power supply. Under normal circumstances, there is no need to cut or wrap the wires, as long as you can dismantle the car shell You can complete the power connection yourself. Since there is no host computer in the middle, the front lens does not need to be disassembled and assembled elsewhere in order to route the cables to the car. Routing and hiding cables is also relatively simple.

[SYM MAXSYM 400 installation example]

Front lens installation

1. First remove the front slope plate, find the power supply and plug it in.

2. Find a suitable location where you want to install it, and after testing that the power supply and APP connection are correct, you can fix the lens and put the car shell back on.

Rear lens installation

The front lens can be mounted under the headlight to capture the action ahead with an ultra-wide angle.

The rear one is placed on the license plate. The front and rear mirrors are the most common way to install a dual-mirror set. So where should the other two be installed?

MX1 PRO is designed with a variety of exclusive mounting brackets, making installation very flexible.

(1) Rear view mirror bracket

(2)License plate holder

(3)Quick adhesive seat bracket

It is worth mentioning that because the MX1 PRO has a G Sensor, it can be installed forward or reverse without any problem. The image will also rotate 180 degrees to the correct orientation according to the installation direction, and it will automatically correct itself every time it is turned on.

[SYM Dijue installation example]

Front lens installation

1. Release the two rearview mirrors and remove the front sloping plate.

2. Untie the power cord on the car and connect it to the Chase special wire. Turn on the power to make sure the recorder is powered on, and then reinstall the front ramp.

3. Install the lens on the bracket (heightening screws are required for this car)

Rear lens installation

1. Remove the glove box

2. Untie the power cord from the car and connect it with the Maxus special wire, secure the power box and wires, and put them back into the glove box.

3. Loosen the license plate screws and lock the rear lens and bracket on the license plate.

If you want to do your job well, you must first sharpen your tools. Those who want to challenge DIY are recommended to prepare an electric screwdriver, which will make it easier to remove screws.

For detailed installation instructions, please watch the video https://youtu.be/mEBT0MyzhD8